HOME  >  News

The Specific Workflow Of The Ribbon Mixer

Nov. 07, 2019

The Ribbon Mixer Machine is generally composed of a U-shaped container, ribbon mixing, blades and transmission components; the U-shaped long body cylinder structure ensures small resistance movement of the mixed material (powder, semi-fluid) in the cylinder. The forward and reverse rotating screws are generally mounted on the same horizontal axis to form a low-dynamic and high-efficiency mixed environment. The ribbon-shaped blades are generally made of two or three layers, and the outer spiral gathers the materials from both sides to the center, and the inner spiral will Material is transported from the center to both sides, allowing the material to form more eddies in the activity. Speed up mixing and increase mixing uniformity;

Ribbon Mixer Machine

Ribbon Mixer Machine

The method of discharging the ribbon mixer is to select the pneumatic large opening structure of the powder material, which has the advantages of quick discharge and no surplus; the high-fine material or semi-fluid material is selected from the manual butterfly valve or the pneumatic butterfly valve. A heating or cooling jacket can be configured. Heating methods include electric heating and heat transfer oil heating.

The cooling process can directly inject cooling water into the jacket, and the heat exchange area of the jacket is large, and the cooling speed is also fast. The small type mixer adopts the direct connection method of the reducer, which has a simple structure, high work reliability and convenient maintenance. The large-type mixer uses a pulley to drive the cycloid reducer, and the elastic connection of the belt drive has the advantage of maintaining the transmission components during overload.

The scope of application mainly includes solid-solid (ie powder and powder) solid-slurry (ie powder and cement) of pesticides, veterinary drugs, food, chemicals, biology, aquaculture, ceramics, refractory materials, plastics, compound fertilizers, etc. It is also used in combination and is especially suitable for the mixing of viscous materials.

The specific process is to perform an empty work test before use. Before the test, check the consolidation degree of all the coupling parts of the machine, the amount of lubricant of the reducer and the integrity of the motor equipment, and then close the main switch of the power supply for the empty work test. . It is advisable to immerse the slurry shaft after the feeding. After the feeding, the trough cover should be covered and then driven, so as to avoid the shallow discharge of the material and the mirror basket on the cover, the mixing condition of the material can be observed.

When the ribbon mixer is used for a long time and high speed operation, it will cause a lot of heat. What is the cause of the high temperature during the operation of the ribbon mixer? The supplier of the Double Cone Mixing Machine will tell you.

Many users have used the ribbon mixer to reflect that before the hydraulic excavator heatstroke, the starting work and speed are normal. After one or two hours of operation, the equipment will stop and the excavation will be weak. In some cases, the engine smokes, and then it is dry. At the moment, the most important job is to stop the equipment and cool it to continue the work, which can reduce the efficiency of the work. As the component wear temperature rises and the internal leakage is added, the function of the hydraulic pump to adjust the system will decrease, and the variable function of the pump will be reduced, and the engine load will be added, and the operation or the flameout cannot be performed normally. Find the reason for the high temperature of the ribbon mixer, so that you can deal with this problem from the source. Especially in the high temperature presented during the operation, it is more necessary to deal with this problem. So that the equipment can work normally when the work is in operation, and there will be no problem.

The above is the specific workflow of the ribbon mixer, I hope to help everyone. In addition, if you are interested in Powder Mixer Machine and ribbon mixers, you can contact us.

Back to List
Contact Us
  • WhatsApp: 8613921209007
  • Mob. : +86 139 2120 9007
  • E-mail: [email protected]
  • Fax : +86 510 8600 3712
  • WeChat : wjt6363
  • Add : 214411 No. 3 Xiyuan Road, Innovation Park, Changjing Town,Jiangyin, Jiangsu Province, China